PLUS
SOFT
FULL LAVORATION
SUPERSHINE & SPONGELUX
New and revolutionary diamond discs to restore the gloss on marble floors and terrazzo. Used regularly, they maintain floors always bright as just polished. Easy to use. Use them as a normal “floor pad” disk with mono brush machines
or auto-scrubbers. They remove scratches, even deep, clean and polish.
They remove deep scratches and restore also acid, wine, coca cola or other products stained -floors.
Generally used grains are 1, 2 and 3 followed by SPONGELUX. If deep or very deep scratches need to be removed it is suggested to start from 0 or 00.
Thanks to its special composition SpongeLux is the ideal solution for standard maintenance of all type of surfaces since it provides great results and keeps floors shining forever.
SUPERSHINE & SPONGELUX BROCHURE
Where can Supershine e Spongelux be used?
• Marble and Terrazzo • Ceramic and Klinker slabs • Natural stone • PVC / Vinyl
• Epoxy resin • Rubber • Wood
SuperShine & Spongelux can be used with
any type of monobrush
SuperShine & Spongelux can be used with
any type of autoscrubber
“SuperShine & SpongeLux” are easy to use!
They are available in the same standard sizes of the Floor Discs normally sold all over the world. They can be applied on any type of floor care machines and auto-scrubbers. Using “Supershine& Spongelux” regularly, instead of the traditional Floor Pads, it allows to restore and maintain the floor shiny forever without changing your normal cleaning routine. The combination of Supershine1, Supershine2 and Supershine3 will allow you to remove scratches. Spongelux, thanks to its magic formula, cleans and polishes marble, concrete, terrazzo ecc.. giving it a mirror effect quickly! Regularly used, your floor will remain clean and shiny.
Diamond and Water, respecting the environment
Just add some water!
The use of Spongelux and Supershine discs requires no chemical or wax. Cleaning and polishing are carried out in full respect of the environment. The usage of just water reduces the environmental impact and eliminates the additional costs of chemicals. With Spongelux and Supershine you will soon obtain an incredibly clean and brighting floor without using wax, polish or chemical.
BENEFITS
• It cuts costs.
• It improves your performance.
• It increases customer satisfaction.
• Floor is always clean and shining.
• Environmental sustainable cleaning.
• It requires only water.
• It reduces bacteria on floors.
Where others cannot reach
The perfect combination between Klindex machines and Supershine discs allows you to operate where others can’t. For example:
With Supershine and Baby you can conveniently polish staircases and landings.
With Supershine and Vertika you can rapidly polish walls, counters and top.
With Supershine and Minielle you can polish narrow spaces.
Marble and Terrazzo: polishing with SUPERSHINE PLUS on single discs floor care machine.
• Start grinding the floor with SUPERSHINE PLUS grit 1 or 2 according to the condition of the floor, then proceed with SUPERSHINE PLUS grit 3. It is always suggested to work with little quantity of water for about 60 sec/mq.
• Polish with SPONGELUX working with little quantity of water.
Marble and Terrazzo: polishing with SUPERSHINE SOFT on automatic Scrubber Dryer.
• Start scrubbing the floor with SUPERSHINE SOFT grit 1 or 2 according to the condition of the floors then proceed with SUPERSHINE SOFT grit 3 and 4.
Maintenance: use SUPERSHINE SOFT grit 4 with neutral cleaner or Stone SOAP as daily maintenance to keep the floor always glossy.
Linoleum, PVC, Vinyl: floor restoration with high speed single disc machines.
• High speed polishing machine like FUTURA is recommended.
• Start scrubbing the floor with SUPERSHINE SOFT grit 1 or 2 according to the condition of the floor then proceed with SUPERSHINE SOFT grit 3 a. It is always suggested to work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq
• Polish with SUPERSHINE SOFT grit 4 working with little quantity of water at the higher speed of 400 rpm.
Maintenance: buff the floor with SUPERSHINE SOFT grit 4 dry system by High speed buffing machine like Tornado. In alternative it can be used FUTURA at speed of 400 rpm.
Matt finished ceramic, klinker and glazed tiles: heavy duty cleaning (do not use on polished tiles).
• Start scrubbing the floor with SUPERSHINE SOFT grit 2 according to the condition of the floor, work at low speed of 160 rpm. Work wet with little quantity of water until old marks and dirty will disappear.
• Proceed with SUPERSHINE SOFT grit 4. Work with little quantity of water, at low speed.
Old wood coating: floor restoration with high speed single disc machines.
• High speed polishing machine like FUTURA is recommended.
• Start scrubbing the floor with SUPERSHINE SOFT grit 1 or 2 according the condition of the floor then proceed with SUPERSHINE SOFT grit 3 and 4. Work dry at medium speed of 200 rpm until old marks and imperfection disappear.
• Polish with SUPERSHINE SOFT grit 4 working at high speed
Maintenance: buff the floor with SUPERSHINE SOFT grit 4 dry system by high speed machine.
Old resin and epoxy coated: floor restoration.
• High speed polishing machine like FUTURA is recommended.
• Start scrubbing the floor with SUPERSHINE SOFT grit 0 or 1 according to the condition of the floor then proceed with SUPERSHINE SOFT grit 2 and 3. It is always suggested to work with little quantity of water at the medium speed of 200 rpm for about 60 sec/mq.
• Polish with SUPERSHINE SOFT grit 4 working with little quantity of water at the higher speed of 400 rpm.
Maintenance: buff the floor with SUPERSHINE SOFT grit 4 dry system by High speed buffing machine like Tornado. In alternative it can be used FUTURA at speed of 400 rpm.
Stone Edges Skirt: polishing by hand grinder and polishing machines.
• Thanks to the high elasticity and performances and thanks to the various size available, Supershine Soft can be used with any hand grinder and polishing machine to operate in those situations where is not possible to use big machines. Supershine Soft makes easy and fast to polish narrow and difficult areas.
• Start grinding the floor with SUPERSHINE SOFT grit 0 or 1 according to the condition of the floor.
• Proceed with SUPERSHINE SOFT grit 2 and 3.
• Polish with SUPERSHINE SOFT 4. Work with little quantity of water or dry at higher speed.